Rolux® Low resistance bend

The concentric bend we developed and designed as an aluminium diecasted product was made to fill the following requirements;

- Mininium flow resistance. We achieved an R=D bend. The bend follows 87 ° of the shape of a full circle.
- To connect the inner bend to the outer bend we designed a baffle helps guide the air through the bend reducing the resistance of the air flow.
- At the same time the baffle works as a strong and stable interconnection fixing mechanism.

An official European patent has been applied for.

Rolux® Roofterminal for condening boilers

The Rolux® Roofterminal was the first roof terminal available in the European market that was developed and designed by using high performance plastics.

The terminal is built up modularly where the aluminium tube functions as the back-bone of the terminal. The exhaust cap, the air inlet cover and air inlet-pipe in the best plastics are mounted around the aluminium tube and held together by using a strong clamp/screw arrangement.

Also incorporated in the design of this terminal is a pressure balancing system in order to optimize the aerodynamic characteristics of this terminal.

Rolux® Modular adaptor

This adaptor was developed and designed in close cooperation with the boiler manufacturer and the installer and incorporates the following features;

- A compact design. It is not a high ‘tower’ on the boiler.
- A condense drain ring.
- Universal connection to almost all standard available boiler top arrangements by using modular parts like flange, clamp or spigot for the 100 mm air inlet of the boiler as well as 60 mm flue tubes in M/F.